PLA Filament: Brands, Prices & Properties

This page summarizes the properties and prices for various brands of PLA filament in an interactive table; some top picks are featured.

Data may be approximated or averaged for simplification and filtering, always check the manufacturer's site for detailed and up to date specifications. For example, a manufacturer recommended heat bed temp of 20-60°C will be presented as 40°C, and a recommended nozzle temp of 200-220°C will be presented as 210°C.

Prices are adjusted to reflect the cost per kilogram since some filaments are sold fractionally.

CF: Carbon Fiber, ESD: Electrostatic Discharge safe, GF: Glass Fiber, FR: Flame Retardant

HDT (Heat Deflection Temperature): Test bar deflection of 0.01" (0.25 mm) with a load of 0.46 MPa (66 psi)

Modulus: MPa 

Tensile Strength: MPa

Fracture Elongation: Percent change in length at the point of failure under the tensile load

The modulus is a measure of the stiffness of a material; higher values will result in a stiffer object. Flexural is the measure against bending, whereas tensile is the measure against compression or tension. The strength is the measure of pressure (distributed force) the part can withstand before failure.

Ultimate Resin Guide - compare resin printers, resin material, and equipment

Preparing for Resin Printing - setting up an enclosure, heating, ventilation, filtration, and cleaning equipment

FDM Printers Guide - comparison table and top picks for filament printers

Resin Properties or Filament Properties - comparison table and top picks for materials

Disclaimer: You assume all responsibility and risk for the use of, but not limited to, the resources, advice, and opinions of 4D Filtration or its employees. 4D Filtration or its employees do not assume any liability or create any warranty for the use of any information. 4D Filtration may receive commissions for referral links. Prices are approximated for simplicity and they may fluctuate due to sales or markdowns. Amazon .com should refer you to your local amazon site if you are not in the United States; there is a chance Amazon's link redirect system will take you to a different product.