We are in the process of transitioning our products to 3rd party fulfillment. During this time we are still taking orders but only shipping orders twice a month - prices have been cut by 10% using code "CHANGE" - orders may take up to 2 weeks to ship. Our items already on Amazon are shipped immediately. Thank you for your understanding.
High Volume In-Stock
SilicaFusion Carbon for 3D Printing
Activated carbon blended with granular and color-indicating silica gel
50% activated carbon and 50% silica gel
Vacuum-sealed in a glass jar to ensure purity
SilicaFusion protects filament from humidity
SilicaFusion improves the effectiveness and lifespan of activated carbon by mitigating water inside the pores of the activated carbon
Silica Gel Adsorption Capacity: 30% wt/wt @ 60% RH
About SilicaFusion Carbon
4D Filtration SilicaFusion combines our acid-free activated carbon with granular and color-indicating silica gel. This blend offers localized moisture control, enhancing both the effectiveness and lifespan of the carbon, while also protecting filament.
When To Use SilicaFusion Carbon: SilicaFusion Carbon is particularly useful when printing filament that is sensitive to moisture, as it lowers the humidity level inside an enclosure.
SilicaFusion Carbon also improves the lifespan and effectiveness of the activated carbon by capturing moisture and depositing it in the silica gel, since the silica gel holds more moisture per unit weight.
How To Use SilicaFusion Carbon: For optimal results, use SilicaFusion Carbon only in recirculating setups. If used for extraction the silica gel will rapidly become saturated with moisture.
SilicaFusion Filament Recommendations: SilicaFusion Carbon is recommended for use with hygroscopic filament such as: Nylon, PVA, TPU, and PC. SilicaFusion is also useful for keeping moisture away from more common filament like PLA, PETG, and ABS as moisture can cause print defects.
SilicaFusion Carbon FAQ
A recirculation setup is one where the air that is being filtered doesn't leave the enclosure. This may be done by having the air cleaner inside the enclosure, or by using duct to direct air from the enclosure, into the air cleaner, then back into the enclosure.
An extraction setup is one where the air is pulled outside of the enclosure through the air cleaner, while air in the room enters the enclosure through gaps. A gap in the enclosure is necessary to allow airflow; otherwise, the fan will be trying to pull a vacuum.
