This 4D Filtration resource is user-supported by donations, affiliate links, and/or ads.

3D Resin: Brands, Prices & Properties

Last Updated: October 17th, 2023

This is your one-stop shop for resin colors, prices, and mechanical & thermal properties.

Unit explanations are below the table. Prices are approximated, may fluctuate due to sales, and we may receive commissions from referrals. Properties not listed within the table are omitted by the manufacturer. Always check the manufacturer TDS of a specific resin for exact values, tolerancing, and property updates. The table columns can be toggled using the buttons; the color, density, viscosity, Izod, TDS, and SDS columns are hidden by default.

Contact Us if you a resin manufacturer and want to add a promo code for the community to use.

We recommend viewing this table on a tablet, laptop, or desktop.

Table of Contents

Resin Brand Name Type Price Colors Density Viscosity HDT Modulus Strength Fracture Elongation Shore D Izod TDS SDS Link 1 Link 2
Anycubic Standard General $35 Green, Blue, Black, Beige, Clear, White, Grey 1.1 552 23.4 14.2% 79 Amazon Anycubic
Anycubic Plant-Based General $35 Green, Blue, Black, Clear, White, Grey, Pink, Yellow 1.15 225 44 15.5% 84 Amazon Anycubic
Anycubic Tough Durable $45 Green, Black, Clear, White, Grey 1.125 200 1050 55 40% 76 55 Amazon Anycubic
Elegoo ABS-Like General $40 Red, Green, Blue, Black, Clear, White, Grey 1.15 200 65 14% 84 Amazon Elegoo
Elegoo Plant-Based General $35 Green, Black, Clear, White, Grey 1.15 300 27.5 82 Amazon Elegoo
Elegoo Water-Washable General $40 Red, Green, Blue, Beige, Black, Clear, White, Grey, Yellow 1.15 225 41 82.5 Amazon Elegoo
Elegoo Standard General $30 Red, Green, Blue, Beige, Black, Clear, White, Grey, Yellow 1.15 175 44.5 14.2% 82.5 Amazon Elegoo
Elegoo Thermochromic Specialty $40 Grey/Purple Amazon Elegoo
Phrozen Aqua 8K General $40 Grey, White, Red, Vanilla 1.1 330 43 18% 85 Amazon Phrozen
Phrozen Aqua 4K General $40 Beige, Grey 1.1 185 6.5% 76 SDS Amazon Phrozen
Phrozen Aqua General $40 Green, Blue 1.12 125 24 21% 86 SDS Amazon Phrozen
Phrozen Water-Washable General $40 Black, Grey 1.05 120 70 13.5 21% 76.5 SDS Amazon Phrozen
Phrozen Protowhite Rigid Strong $80 Clear 1.1 220 55 2300 57 15% 77 28 Amazon
Phrozen ABS-Like General $35 White, Grey 1.1 77 70 192 12 2% 79 SDS Amazon Phrozen
Phrozen TR250LV High Temp $50 Grey 1.1 230 100 25 20% 79 SDS Amazon Phrozen
Phrozen Low-Irritation General $70 Beige 1.16 750 2330 75 SDS Phrozen
Phrozen TR300 High Temp $50 Grey 1.1 160 220 1850 32 1% 80 SDS Phrozen
Phrozen Tough Durable $80 Green 1.1 742 73 19 130% 68 SDS Amazon Phrozen
Phrozen Stiff General $80 Black 1.1 119 80 30 4% 81 SDS Amazon Phrozen
Phrozen Onyx Pro410 Strong $70 Black 1.4 500 62 1665 43 5% 78 25 TDS SDS Amazon Phrozen
Phrozen Onyx Impact Durable $90 Black 1.1 52 1175 37 98% 72 145 TDS SDS Amazon Phrozen
Siraya Tech ABS-Like General $37 Green, Beige, Black, White, Grey 100 68 800 33 6% 72 TDS SDS Amazon
Siraya Tech Blu Durable $50 Blue, Clear 75 1500 44 25% 85 TDS SDS Amazon
Siraya Tech Sculpt High Temp $40 Clear, Grey 1.13 550 160 1000 63 6% 82 TDS SDS Amazon
Siraya Tech Sculpt Ultra High Temp $75 Clear 550 220 1400 75 2% 99 TDS SDS Amazon
Siraya Tech Tenacious Flexible $65 Clear 60 500 24 50% 65 TDS SDS Amazon
Siraya Tech Simple General $35 Black, Clear 52 450 32 4% 86 TDS SDS Amazon
Siraya Tech Build General $40 Black, Grey 140 74 1050 50 8% 85 TDS SDS Amazon
Siraya Tech Wax Castable Specialty $75 Violet TDS SDS Amazon
Siraya Tech Form General $40 Grey 1.13 900 120 825 60 6% 80 TDS SDS Amazon
Siraya Tech Glow Specialty $60 White 330 65 950 43 2.5% 84 TDS SDS Amazon
3D Materials SuperFast General $30 Black, Clear, White, Grey, Amber 119 116 2380 72 2.5% 25 TDS SDS Amazon 3D Materials
3D Materials SuperPP Durable $40 Clear 52 1410 42 25% 120 TDS SDS Amazon 3D Materials
3D Materials SuperFlex Flexible $60 Clear 32 5.5 80% TDS SDS Amazon 3D Materials
3D Materials SuperHDT High Temp $65 Clear 240 3000 39.8 2% TDS Amazon 3D Materials
3D Materials SuperPCS Durable $40 Black, Grey, Clear 50 1700 48 15% 140 TDS Amazon 3D Materials
3D Materials SuperRigid Strong $100 White 175 5550 59 1.3% 25 TDS Amazon 3D Materials
3D Materials SuperElastic Flexible Clear 4.6 1.3 46% TDS Amazon 3D Materials
3D Materials SuperSilicone Flexible Clear 4.6 1.3 46% TDS Amazon 3D Materials
Resione HT100 Strong $130 Yellow 560 98 2880 78 2.2% 90 8 TDS AliExpress
Resione Water-Washable General $55 Blue, Black, Clear, White, Grey, Orange 139 36 18% 82 16.5 TDS Amazon AliExpress
Resione F69 Flexible Flexible $90 Black 980 8 255% 68A TDS Amazon AliExpress
Resione F80 Elastic Flexible $70 Beige, Black 2300 1.7 80% 58A TDS Amazon AliExpress
Resione F39 Flexible Flexible $80 Clear, White 980 8 255% 68A TDS Amazon AliExpress
Resione K Tough Durable $70 Black 307 48.5 16.8% 82 58.4 TDS Amazon
Resione M58 ABS-Like General $70 Grey 307 52.3 12.3% 87 51.4 TDS Amazon AliExpress
Resione M68 ABS-Like General $70 White 307 54.3 13.9% 87 58.1 TDS Amazon AliExpress
Resione G217 ABS-Like General $70 Clear 396 65.3 10.4% 90 30.8 TDS Amazon AliExpress
Resione M70 Precision General $70 Orange 360 68 32 9% 89 6.5 TDS Amazon AliExpress
Prusa Tough Durable $70 Black, Grey, Orange 205 55 1600 41.6 5.8% 76 TDS SDS Prusa
Formlabs Draft General $150 Grey 53 1700 36 5% 29 TDS SDS Formlabs
Formlabs Rigid 10K Strong $300 White 163 10000 65 1% 16 TDS SDS Formlabs
Formlabs Rigid 4000 Strong $200 White 77 4100 69 5.3% 23 TDS SDS Formlabs
Formlabs Tough 2000 Durable $175 Grey 63 2200 46 48% 40 TDS SDS Formlabs
Formlabs Tough 1500 Durable $175 Grey 52 1500 33 51% 67 TDS SDS Formlabs
Formlabs Durable Durable $175 Grey 41 1000 28 55% 114 TDS SDS Formlabs
Formlabs Elastic 50A Flexible $200 Clear 3 160% 50A TDS SDS Formlabs
Formlabs Flexible 80A Flexible $200 Clear 9 120% 80A TDS SDS Formlabs
Formlabs Flexible Flexible $200 Grey 8 80% 82A TDS SDS Formlabs
Formlabs High Temp High Temp $200 Clear 238 2800 58 3.3% 18 TDS SDS Formlabs
Formlabs Ceramic High Temp $150 White 290 1000 5 1.4% 18 TDS SDS Formlabs
Formlabs Grey Pro General $175 Grey 78 2600 61 13% 19 TDS SDS Formlabs
Formlabs Model General $150 Beige 75 2300 48 4.8% 24 TDS SDS Formlabs
Formlabs Standard General $150 Grey, Clear, White, Black 73 2800 65 6.2% 25 TDS SDS Formlabs
Resin Brand Name Type Price (USD) Colors Density (g/cc) Viscosity (mPa-s) HDT (°C) Modulus (MPa) Strength (MPa) Fracture Elongation Shore D Izod (J/m) TDS SDS Link 1 Link 2

Density: g/cm (water is ≈1 g/cm)

Viscosity: mPa-s, 1 mPa-s = 1 cps (water is ≈1 mPa-s)

HDT (Heat Deflection Temperature): Test bar deflection of 0.01" (0.25 mm) with a load of 0.46 MPa (66 psi)

Modulus: MPa Young's Modulus > Tensile Modulus > Flexural Modulus - priority due to manufacturer availability

Strength: MPa Tensile Strength - may be yield or break, whichever is manufacturer specified

Fracture Elongation: Percent change in length at the point of failure under the tensile load

Shore: Resistance to indentation (examples: rubber bands ≈ 20A, eraser ≈ 55A, golf ball ≈ 50D, wooden ruler ≈ 70D, bone ≈ 90D)

Izod Impact Strength Test: J/m - the kinetic energy needed to fracture and break the test specimen

Resin Top Picks

These are a few of our favorite resins that are affordable and widely available.

SuperFast by 3D Materials is the best bang for buck resin. It is good for general prints, and its shining feature is the exceptionally low layer cure time. The layer cure time for SuperFast on most resin printers is 0.6 to 1.5 seconds.

Blu by Siraya Tech is a very popular durable resin for printing miniatures. As a bonus, this resin has undergone testing to be labeled as skin-safe when properly cleaned and cured.

SuperPP by 3D Materials is a durable resin ideal for miniatures, at a lower cost than Siraya Tech Blu. SuperPP has the lowest layer cure time of any durable resin.

3D Materials - Superfast

$30

Amount: 1kg (0.9 liter)

Break Elongation: 2.5%

Tensile Strength: 29MPa

3D Materials Superfast
3D MaterialsAmazon

Siraya Tech - Blu

$50

Amount: 1kg (0.9 liter)

Break Elongation: 25%

Tensile Strength: 39MPa

Siraya Tech Blu Resin
Siraya TechAmazonMatterHackers

3D Materials - SuperPP

$40
(10% Off)
Amount: 1kg (0.9 liter)

Break Elongation: 25%

Tensile Strength: 42MPa

3D Materials SuperPP
3D MaterialsAmazon

Resins - Budget

The budget resins listed below are widely-available, comparably affordable, and ideal for general use. These resins are good for printing minis, lithographs, trinkets, and gifts. Budget resins can be brittle but have lower exposure times compared to flexible resins; you can reduce the brittleness of prints by mixing in 10-20% of a flexible resin.

Ideal for:

  • General use
  • Minis, lithographs, and gifts
  • A base for mixing
  • Molds for silicone

3D Materials - Superfast

$30

Amount: 1kg (0.9 liter)

Break Elongation: 2.5%

Tensile Strength: 29MPa

3D Materials Superfast
3D MaterialsAmazon

Anycubic - Standard

$33

Amount: 1kg (0.9 liter)

Break Elongation: 14.2%

Tensile Strength: 23.4MPa

Anycubic Standard
AnycubicAmazonAliExpress

Siraya Tech - ABS-Like

$37

Amount: 1kg (0.9 liter)

Break Elongation: 6%

Tensile Strength: 33MPa

Siraya Tech Fast Resin
Siraya TechAmazonMatterHackers

Phrozen - Aqua

$35

Amount: 1kg (0.9 liter)

Break Elongation: 21%

Tensile Strength: 24MPa

Phrozen Aqua
Amazon

Phrozen - ABS-Like

$30+

Amount: 1kg (0.9 liter)

Break Elongation: 2%

Tensile Strength: 12MPa

Phrozen Abs-Like Resin
Amazon

Elegoo - Standard

$27+

Amount: 1kg (0.9 liter)

Break Elongation: 14.2%

Tensile Strength: 44.5MPa

Elegoo Standard
ElegooAmazon

Elegoo - ABS-Like

$35

Amount: 1kg (0.9 liter)

Break Elongation: n/a

Tensile Strength: 41MPa

Elegoo Abs-Like Resin
ElegooAmazon

Resins - Strong

Strong resin are stiff and have a high strength value. The parts printed from strong resins will exhibit very little flexibility, and they will require a large force to damage the part.

Ideal for:

  • Fixtures and tooling
  • Component housings
  • Fluid, airflow, and pressurized components

Siraya Tech - Sculpt

$40

Amount: 1kg (0.9 liter)

Tensile Modulus: 1000MPa

Tensile Strength: 63MPa

Siraya Tech Sculpt Resin
Siraya TechAmazon

3D Materials - SuperRigid

$50
(10% Off)
Amount: 0.5kg (0.4 liter)

Tensile Modulus: 5550MPa

Tensile Strength: 59MPa

Phrozen Onyx Pro410
3D MaterialsAmazon

Phrozen - Onyx Pro410

$70

Amount: 1kg (0.9 liter)

Tensile Modulus: 1410MPa

Tensile Strength: 43MPa

Phrozen Onyx Pro410
Amazon

Resione - G217 ABS-Like

$70

Amount: 1kg (0.9 liter)

Tensile Modulus: n/a

Tensile Strength: 65.3MPa

Resione G217
ResioneAmazon

Prusa - Tough

$70

Amount: 1kg (0.9 liter)

Tensile Modulus: 1600MPa

Tensile Strength: 41.6MPa

Phrozen Onyx Pro410
Prusa

Resins - Durable

Durable resin parts are moderately flexible, which allows the parts to be resistant to impacts, drops, and bending. These resins are ideal if you want to print minis without having to mix resins.

Ideal for:

  • Fixtures and tooling
  • Prototypes with moderate flexibility
  • Minis that are impact resistant

3D Materials - SuperPP

$40
(10% Off)
Amount: 1kg (0.9 liter)

Break Elongation: 25%

Tensile Strength: 42MPa

3D Materials SuperPP
3D MaterialsAmazon

Siraya Tech - Blu

$50

Amount: 1kg (0.9 liter)

Break Elongation: 25%

Tensile Strength: 39MPa

Siraya Tech Blu Resin
Siraya TechAmazonMatterHackers

3D Materials - SuperPCS

$40
(10% Off)
Amount: 1kg (0.9 liter)

Break Elongation: 15%

Tensile Strength: 48MPa

3D Materials SuperPP
3D MaterialsAmazon

Anycubic - Tough

$45

Amount: 1kg (0.9 liter)

Break Elongation: 40%

Tensile Strength: 55MPa

Anycubic Flexible Tough
AnycubicAmazonAliExpress

Resins - High Temperature

High temperature resins are ideal for epoxies that need to be heat cured, parts that are exposed to warm environments, and for printing structural components for heated chamber FDM printers. Under normal circumstances, these resins can not be used for metal molds; if you are wanting to cast metal, opt for ceramic or wax resins.

Ideal for:

  • High-temp molds - ie: heat cured epoxies
  • Hot fluids
  • Components exposed to high temperatures

3D Materials -
SuperHDT

$65
(10% Off)
Amount: 1kg (0.9 liter)

HDT: 240°C

3D Materials SuperHDT
3D MaterialsAmazon

Siraya Tech -
Sculpt

$40

Amount: 1kg (0.9 liter)

HDT: 160°C

Siraya Tech Sculpt Resin
Siraya TechAmazon

Siraya Tech -
Sculpt Ultra

$75

Amount: 1kg (0.9 liter)

HDT: 220°C

Siraya Tech Sculpt Ultra Resin
Siraya TechAmazon

Phrozen - 
TR250

$45

Amount: 1kg (0.9 liter)

Tg: 100°C

Phrozen TR2500 Resin
PhrozenAmazon

Phrozen - 
TR300

$50

Amount: 1kg (0.9 liter)

Tg: 220°C

Phrozen TR300 Resin
Phrozen

Resins - Flexible

Flexible resins are good for mixing with budget resins to mitigate brittleness, prototyping flexible products like shoes, and creating fun squeezable prints.

Ideal for:

  • Rubber-Like prototyping
  • Mixing with brittle budget resins
  • Grips, shock absorption, and gaskets
  • Easy-release molds

3D Materials - SuperFlex

$60
(10% Off)
Amount: 1kg (0.9 liter)

Break Elongation: 80%

Tensile Strength: 5.5MPa

3D Materials Superflex
3D MaterialsAmazon

Siraya Tech - Tenacious

$65

Amount: 1kg (0.9 liter)

Break Elongation: 50%

Tensile Strength: 24MPa

Siraya Tech Tenacious Resin
Siraya TechAmazonMatterHackers

Phrozen - Tough

$78

Amount: 1kg (0.9 liter)

Break Elongation: 130%

Tensile Strength: 19MPa

Phrozen Tough Resin
Amazon

Resione - F69 Flexible

$80

Amount: 1kg (0.9 liter)

Break Elongation: 255%

Tensile Strength: 8MPa

Resione Flexible
ResioneAmazon

Disclaimer: You assume all responsibility and risk for the use of, but not limited to, the resources, advice, and opinions of 4D Filtration or its employees. 4D Filtration or its employees do not assume any liability or create any warranty for the use of any information. 4D Filtration may receive commissions for referral links. Prices are approximated for simplicity and they may fluctuate due to sales or markdowns. Amazon .com should refer you to your local amazon site if you are not in the United States; there is a chance Amazon's link redirect system will take you to a different product.