HEPA 13 Filter

free Domestic shipping! USA Flag
International shipping is available - if your country is not listed, please contact us 
6 inch HEPA 13 filter for the 3D printing Promethean fume extractor

HEPA 13 Filter

Features

  • Includes: 24" of Filter Foam
  • Avg efficiency for 0.3μm particles: >99.95%
  • Nominal Dimensions: 6 x 6 x 1 inch
  • Single refill for Promethean

 HEPA 13 Information

  • Average Efficiency for 0.3μm Particles:>99.95% 
  • Nominal Dimensions:6x6x1 in

High Efficiency Particulate Arrestance (HEPA 13)Example Contaminants Per Range

  • 0.30 to 1.0μm:>99.95% Bacteria, Smoke, Paint Pigments, Some Virus, Soldering Fumes
  • 1.0 to 3.0μm:>99.95% Lead Dust, Some Bacteria, Abrasive Dust, Auto Emissions
  • 3.0 to 10.0μm:>99.95% Pollen, Earth-Origin Dust, Mold Spores, Cement Dust, Hair Spray Mist, Paint Dust

HEPA 13 FAQ

The filter is manufactured as a F7 filter under EN 779 - this classification is based on the average efficiency of the filter in capturing 0.4μm particles. MERV 13 is the ASHRAE approximate classification for F7 filters.

MERV 13-16 provides filtration efficiencies near HEPA while not sacrificing the airflow/process rate. This captures the vast majority of particulates and it allows a focus on VOC & gaseous contaminant removal. We will release HEPA filters soon for applications sensitive to particulates.

It is recommended to replace the MERV 13 filter every 2-3 months. The activated carbon should be replaced every 2-3 months. For higher-load applications the carbon should be replaced upon the reemergence of odors as the lifetime is highly dependent on filament/print settings.

Related Items